For 1990-2009 cars only
Removal Procedure
- Pull the lower corners of the front seat-back trim (3) away from the seat (1) disengaging the two retaining clips (2).
- While holding the lower section of the rear trim cover (2) out, pull the cover down to release the two upper retaining lugs (1).
- Remove the rear trim cover (2).
Installation Procedure
- Align the two upper retaining lugs (1) with the seat-back.
- Push the front seat-back rear trim cover (2) up and in at the lower edge to engage the two lower retaining clips.
Notice: Refer to General Repair Instructions in the Preface section.
