Exhaust Manifold Installation - Right Side NT3

1. Install a NEW exhaust manifold gasket (1) and NEW sealing ring (3) to the exhaust manifold (2).

Notice: Refer to Exhaust System Inspection Notice in the Preface section.

2. Install the exhaust manifold assembly to the engine.




Important: DO NOT fully tighten the exhaust manifold to cylinder head retaining bolts (1) at this stage.

3. Install the NEW exhaust manifold to cylinder head retaining bolts (1).

Notice: Refer to Fastener Notice in the Preface section.

4. Tighten the exhaust manifold to cylinder head retaining bolts (1) working from the centre to the outside.

Tighten
Tighten the bolts to 20 N·m (15 lb ft).




5. Install the exhaust manifold heat shield (2).
6. Install the exhaust manifold heat shield to exhaust manifold retaining bolts (1).

Tighten
Tighten the bolts to 10 N·m (89 lb in).