- Install the cylinder block-to-cylinder head alignment dowels (1).
- Install the NEW front oil gallery expansion plug (1).
- Make sure the NEW front oil gallery expansion plug (1) is installed
to the correct depth.
- Install the cylinder block-to-transmission alignment dowels (1).
- Apply RTV sealant on the NEW coolant expansion plugs (1).
- Install the NEW coolant expansion plugs (1).
- Make sure the NEW coolant expansion plugs (1) are installed to
the correct depth.
- Apply thread sealant on the threads of the M20 left side oil gallery threaded
plug (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the M20 left side oil gallery threaded plug (1).
Tighten
Tighten the plug to 31 N·m (23 lb ft).
- Apply thread sealant on the threads of the M14 left side coolant drain threaded
plug (1).
- Install the M14 left side coolant drain threaded plug (1).
Tighten
Tighten the threaded plug to 31 N·m
(23 lb ft).
- Apply thread sealant on the threads of the M14 rear oil gallery threaded plug (1).
- Install the M14 rear oil gallery threaded plug (1).
Tighten
Tighten the plug to 31 N·m (23 lb ft).
- Apply thread sealant on the threads of the M14 right side coolant drain threaded
plug (1).
- Install the M14 right side coolant drain threaded plug (1).
Tighten
Tighten the plug to 31 N·m (23 lb ft).
- Apply thread sealant on the threads of the M14 right side oil gallery threaded
plug (1).
- Install the M14 right side oil gallery threaded plug (1).
Tighten
Tighten the plug to 31 N·m (23 lb ft).
- Install the cylinder block-to-oil pan alignment dowels (1).
- Install the NEW right front oil pan rail oil gallery expansion plug (1).
- Make sure the NEW right front oil pan rail oil gallery expansion plug (1)
is installed to the correct depth.
- Install the oil jets (1).
- Install the oil jet to cylinder block retaining bolts (2).
Tighten
Tighten the bolts to 10 N·m (89 lb in).