Tools Required
EN 46111 Crankshaft Rotation Socket
- Make sure the crankshaft sprocket is installed with the timing mark (1)
visible.
- Install the crankshaft sprocket (1) on to the nose of the crankshaft (2).
- Align the keyway in the crankshaft sprocket (1) with the key in
the crankshaft (2).
- Slide the crankshaft sprocket on the crankshaft (2) nose until
the crankshaft sprocket (1) contacts the step in the crankshaft (2).
- If necessary, align the crankshaft sprocket to the stage one timing drive
assembly position using the
EN 46111 .
Refer to
Camshaft Timing Drive Chain Alignment Diagram.