- Install the alternator bracket (2) to the engine
block.
Notice: Refer to Fastener Notice in the Preface section.
- Install the alternator bracket to engine block retaining bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Install the coolant inlet pipe to alternator mounting bracket retaining
nut (3).
Tighten
Tighten the bolts to 22 N·m (16 lb ft).
- Position the alternator (3) on the alternator mounting bracket (4).
Important: The alternator mounting studs (4)
have hexagonal outer ends to assist with removal and installation.
- Install the alternator to alternator bracket retaining studs (1) if required.
Tighten
Tighten the studs to 18 N·m (13 lb ft).
- Install the alternator to alternator bracket stud retaining nuts (2).
Tighten
Tighten the nuts to 18 N·m (13 lb ft).