Notice: Refer to Fastener Notice in the Preface section.
Important: If the pressure test plug (40), O-ring (66),
level hole plug (36) and O-ring (37) are not damaged, they should
be reused.
- Inspect the pressure test hole plug (40) and O-ring seal (66)
for damage.
- Install the pressure test plug (40) and O-ring seal (66).
Tighten
Tighten the pressure test plug to 11N·m (8 lb. ft).
- Inspect the fluid level hole plug (36) and O-ring seal (37)
for damage.
- Install the transmission fluid level hole plug O-ring seal (37)
and the transmission fluid level hole plug (36).
Tighten
Tighten the level hole plug to 20N·m (15 lb. ft).