Removal Procedure
Important: When a suitable hold open device is being
removed or installed, provide alternate support to avoid the possibility of damage
to the vehicle or personal injury.
- Install a suitable liftgate brace to the vehicle.
- Using both hands, carefully disengage the headlining rear trim panel retainer
forward edge to body retaining clips (1).
- Remove the headlining rear trim panel retainer (2) from the vehicle.
Installation Procedure
Important: When a suitable hold open device is being
removed or installed, provide alternate support to avoid the possibility of damage
to the vehicle or personal injury.
- Position the headlining rear trim panel retainer (2) to the vehicle.
- Carefully engage the headlining rear trim panel retainer to body retaining
clips (1). An audible click will confirm correct installation.
- Ensure the trailing edge of the headlining rear trim panel is correctly
engaged into the liftgate opening seal.
- Remove the suitable liftgate brace from the vehicle.