GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 2047063  Size: SH

    Important: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Install a suitable liftgate brace to the vehicle.
  2. Using a suitable tool, carefully disengage the rear end trim finish panel to door frame retaining clips (2).
  3. Remove rear end trim finish trim panel (1) from the vehicle.

Installation Procedure


    Object Number: 2047063  Size: SH

    Important: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Position the rear end trim finish panel (1) to the door frame.
  2. Carefully engage the rear end finish trim panel to door frame retaining clips (2) to the door frame. An audible click will confirm correct fitment.
  3. Remove the suitable liftgate brace from the vehicle.