GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1939834  Size: SH
  1. Detach the sunshade assembly (2) from the sunshade support (1) and rotate to gain access.
  2. Remove the retaining screw (3) attaching the sunshade assembly to the head lining assembly.

  3. Object Number: 1939839  Size: SH
  4. Pull the sunshade assembly (2) away from the roof lining assembly and disconnect the sun shade assembly electrical connection (1).
  5. Remove the sunshade assembly (2). The right side is shown, the left side is the same.

  6. Object Number: 1939836  Size: SH

    Important: Take care not to loose the sunshade support retaining mechanism and spring.

  7. Remove the retaining pin (1) attaching the sunshade support (2) to the sunshade retainer.
  8. Remove the sunshade support.

Installation Procedure


    Object Number: 1939840  Size: SH

    Important: When installing the sunshade, ensure the pivot line is vertical.

  1. Install the sunshade support (2) by inserting the sunshade support retaining pin (1).

  2. Object Number: 1939839  Size: SH
  3. Connect the sun shade assembly (2) electrical connector (1).

  4. Object Number: 1939845  Size: SH
  5. Rotate the sunshade assembly (2) and install it into the sunshade support (1).
  6. Tighten
    Tighten the torx screw (3) to 2.0  N·m (18 lb in).

  7. Install the sunshade assembly (2) into the sunshade support (1).
  8. Test sunshade for correct operation.