GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Caprice WM 🢒 Preface 🢒 Cautions and Notices 🢒 Rear Bumper Fascia Reflector Replacement

Removal Procedure
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.

    2. Object Number: 2050166 Size: SH
  2. Remove the rear bumper fascia reflector retaining screw (1) from behind the rear bumper fascia (2).
  3. Slide the rear bumper fascia reflector towards the centre of the rear bumper fascia, disengaging clip.
  4. Remove the rear bumper fascia reflector from the rear bumper fascia.

Installation Procedure

    Object Number: 2050166 Size: SH
  1. Install the rear bumper fascia reflector by sliding into position in the rear bumper fascia (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the rear bumper fascia reflector retaining screw (1).

    3. Tighten
    Tighten the screws (1) to 2  N·m (18 lb in).

  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.