Diagnostic Instructions
DTC Descriptor
DTC U2136: No Exterior Mirror Communication
Circuit/System Description
The memory seat module (MSM) continuously sends a communication signal to the
MCM. Upon receiving the signal, the MCM sends a reply signal, confirming that it can
communicate.
Conditions for Running the DTC
The MSM is active.
Conditions for Setting the DTC
The MSM does not receive a response from the MCM for 10 or more consecutive
seconds.
Action Taken When the DTC Sets
The memory recall function is disabled.
Conditions for Clearing the DTC
• | The current DTC will clear when the MSM receives a communication reply
from the MCM. |
• | The history DTC will clear after 50 fault-free ignition cycles
have occurred. |
Reference Information
Schematic Reference
Connector End View Reference
Component Connector End Views
Electrical Information Reference
Scan Tool Reference
Control Module References
Circuit/System Testing
- Disconnect the A154 SIM connector, and the A21-X3 MSM connector.
- Using a DMM test the SIM; position 1, position 2, position 3,
mirror dip, UART, module wake-up and power circuits for resistance.
⇒ | If greater than 5 ohms, repair or replace the effected circuit(s). |
⇒ | If less than 5 ohms, replace the MSM. |
Repair Instructions
Perform the
Diagnostic Repair Verification
after completing the diagnostic procedure.
Memory Seat Control Module Replacement
.