Removal Procedure
- Turn the ignition to Off.
- Remove the center console. Refer to
Console Replacement
.
- Disconnect the yaw rate sensor connector.
- Remove the yaw rate sensor attaching bolt.
- Remove the yaw rate sensor.
Installation Procedure
- Install the yaw rate sensor.
Notice: Refer to Fastener Notice in the Preface section.
- Install the yaw rate sensor attaching bolt.
Tighten
Tighten the nuts to 10 N·m (7 lb ft).
- Connect the yaw rate sensor connector.
- Install the center console. Refer to
Console Replacement
.