GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Captiva 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1760690 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Release the connector lock and pull the transducer wire connector out.
  3. Remove the transducer with a wrench.
  4. Discard the O-ring seal.

Installation Procedure

    Object Number: 1760690 Size: SH
  1. Install the new O-ring seal on the transducer.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the pressure transducer.

    3. Tighten
    Tighten the pressure transducer to 7 N·m (62 lb in).

  3. Connect the wire connector.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .