GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Captiva 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Cushion Trim Cover Replacement

Removal Procedure

    Object Number: 1756152 Size: SH
  1. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the screws and the rear seat trim.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1756152 Size: SH
  1. Install the rear seat trim with the screws.

    2. Tighten
    Tighten the rear seat trim screws to 12 N·m (9 lb ft).

  2. Install the rear seat from the vehicle. Refer to Rear Seat Replacement .

Removal Procedure

    Important: The procedure for rear seat cushion trim cover replacement is the same for both sides of the 60/40 seat.


    Object Number: 2000558 Size: SH
  1. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement.
  2. Disconnect the rear seat strut rod (1) from the seat trim stud (2).

    3. Object Number: 2000623 Size: SH
  3. Remove the lower rear seat cushion trim screws (1) and remove the lower trim covers (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

    Important: The procedure for rear seat cushion trim cover replacement is the same for both sides of the 60/40 split fold seat.


    Object Number: 2000623 Size: SH
  1. Install the lower trim covers (2) and the lower rear seat cushion trim screws (1).

    2. Tighten
    Tighten the rear seat cushion trim cover screws to 3 N·m (26 lb in).


    Object Number: 2000558 Size: SH
  2. Connect the rear seat strut rod (1) to the seat trim stud (2).
  3. Install the rear seat into the vehicle. Refer to Rear Seat Replacement.