| • | Keep sharp objects and potentially damaging objects away from the seat belts. |
| • | Avoid bending or damaging any portion of the buckle or the latch plate. |
| • | Do not bleach or dye the belt webbing. Use only mild soap and water in order to clean the belts. |
| • | When installing the seat belt anchor bolts and the screws, start the bolts and the screws by hand in order to prevent crossthreading. |
| • | Do not attempt any repairs on the retractor mechanisms or the covers. Replace any defective assemblies with new assemblies. |
| • | Replace any belts that are cut or damaged in any way. |
- Inspect all seat belt anchor bolts and the screws in order to verify that they are secure.
- Inspect the seat belt buckle. The buckle must lock and unlock easily.
- After inserting the latch into the buckle, tug sharply on the belt. The buckle must remain locked.
- Fully extend the shoulder belt portion to make sure that there is no twisting or tears in the belt.
- Let the shoulder belt retract fully. The belt should retract easily.
