GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Captiva 🢒 Safety and Security 🢒 Seat Belts 🢒 Rear Number 2 Folding Seat Replacement

Removal Procedure

    Object Number: 1756165 Size: SH
  1. Remove the bolts securing the rear portion of the 3rd rear seat to the floor.
  2. Remove the 3rd rear seat.

Installation Procedure

    Object Number: 1756169 Size: SH
  1. Install the 3rd rear seat.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts into the rear portion of the 3rd rear seat.

    3. Tighten
    Tighten the rear seat-to-floor bolts to 45 N·m (33 lb ft).

Removal Procedure

    Object Number: 2000543 Size: SH
  1. Remove the rear compartment stow tray. Refer to Rear Storage Compartment Replacement.
  2. Remove the rear passenger door rocker panel.
  3. Remove the rear compartment sill trim plate. Refer to Rear Side Door Sill Trim Plate Replacement.
  4. Remove the rear number 2 folding seat to floor fasteners (1).

    5. Object Number: 2000544 Size: SH
  5. Remove the rear number two folding seat (1) by disengaging the retainer hooks (2) from the vehicle floor (3).

Installation Procedure

    Object Number: 2000544 Size: SH
  1. Install the rear number two folding seat (1) into the vehicle.
  2. Engage the rear number two folding seat retainer hooks (2) into the vehicle floor (3).

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2000543 Size: SH
  3. Install the rear number two folding seat-to-floor fasteners (1).

    4. Tighten
    Tighten the rear number two folding seat-to-floor fasteners to 45 N·m (33 lb ft).

  4. Remove the rear compartment stow tray. Refer to Rear Storage Compartment Replacement.
  5. Install the rear passenger door rocker panel.
  6. Install the rear compartment sill trim plate. Refer to Rear Side Door Sill Trim Plate Replacement.