Engine Coolant Temperature Sensor Replacement for Chevrolet Captiva 2008

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the engine cover. Refer to Engine Cover Replacement .



3. Disconnect the engine coolant temperature (ECT) sensor connector.
4. Remove the ECT sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the engine coolant temperature sensor.

Tighten
Tighten the ECT sensor to 35 N·m (25.8 lb ft).

2. Connect the engine coolant temperature sensor.



3. Install the engine cover. Refer to Engine Cover Replacement .
4. Connect the negative battery cable.