Engine Mount Replacement - Right Side for Chevrolet Captiva 2008

Tools Required

DW-110-060 Engine Assembly Support Fixture

Important: Only lift the engine far enough to take the weight off the engine mount assembly.

1. Support the engine assembly using DW-110-060 .



2. Remove the engine mount adapter retaining bolts from the engine mount support bracket.
3. Remove the engine mount frame side bracket retaining bolt and nuts.
4. Remove the engine mount assembly.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the engine mount assembly.

Tighten

•	Tighten the engine mount frame side bracket retaining bolt to 100 N·m (74 lb ft).

•	Tighten the nuts to 90 N·m (66 lb ft).

•	Tighten the engine mount adapter retaining bolts to 50 N·m (37 lb ft).

2. Remove the engine assembly support fixture DW-110-060 .