Step | Action | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and perform the necessary inspections? | Go to Step 2 | |||||||||
2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK | ||||||||
3 | Inspect the steering column components for looseness. Are the steering column components loose? | Go to Step 6 | Go to Step 4 | ||||||||
4 | Inspect the SIR coil for noise. Is the SIR coil noisy? | Go to Step 7 | Go to Step 5 | ||||||||
5 | Inspect the upper steering column shaft bearing for the following conditions:
Are the bearings in need of repair or replacement? | Go to Step 8 | Go to Step 9 | ||||||||
6 | Tighten the steering column components to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 9 | -- | ||||||||
7 | Replace the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement . Did you complete the repair? | Go to Step 9 | -- | ||||||||
8 | Replace the steering column. Refer to Steering Column Replacement . Did you complete the repair? | Go to Step 9 | -- | ||||||||
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
