Instrument Panel Storage Compartment Replacement for Chevrolet Captiva 2008

Important: Left - Hand Drive Shown, Right - Hand Drive Similar.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .



2. Remove the screws at the base of the storage compartment.
3. Open and remove the screws.
4. Disconnect the electrical connector.
5. Remove the storage compartment.

1. Position the storage compartment in the instrument panel.
2. Connect the electrical connector.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the storage compartment with the screws.

Tighten
Tighten the storage compartment screws to 2 N·m (18 lb in).

4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .