GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva 🢒 Preface 🢒 Cautions and Notices 🢒 Tail Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Object Number: 1758344 Size: SH
  2. Disconnect the electrical connectors.
  3. Remove the nuts and the lamp assembly.
  4. Remove any inoperative bulb.

Installation Procedure

    Object Number: 1758344 Size: SH
  1. Install the replacement bulbs.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the lamp assembly with the nuts.

    3. Tighten
    Tighten the rear combination lamp assembly nuts to 2.5 N·m (22 lb in).

  3. Connect the electrical connectors.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .