GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Exhaust Particulate Filter Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1820655 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the exhaust gas temperature (EGT) sensor 2 connector.
  3. Disconnect the diesel particulate filter (DPF) pressure hoses.
  4. Remove the DPF assembly.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1820655 Size: SH
  1. Install the DPF assembly and tighten the retaining nuts to 30 N·m (22.1 lb ft).
  2. Connect the exhaust gas temperature (EGT) sensor 2 connector.
  3. Connect the negative battery cable.