GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition Coil Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1760931 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the direct ignition system (DIS) connector.
  3. Note the ignition wires’ location and remove the ignition wires.

    4. Object Number: 1760933 Size: SH
  4. Remove the DIS retaining bolts.
  5. Remove the DIS.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1760933 Size: SH
  1. Install the DIS into the mounting location and install the retaining bolts.

    2. Tighten
    Tighten the DIS retaining bolts to 10 N·m (89 lb in).


    Object Number: 1760931 Size: SH
  2. Connect the DIS connector.
  3. Install the ignition wires.
  4. Connect the negative battery cable.