Transmission Fluid Pump Assemble. Chevrolet Captiva 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva 🢒 Transmission 🢒 Automatic Transmission - 6T40/6T45 🢒 Transmission Fluid Pump Assemble

Table 1:	Fluid Pump with Valve Trains Assemble
Table 2:	Torque Converter Fluid Seal and Fluid Filter Assembly Assemble

Callout	Component Name
1	TCC Blow Off Ball Valve Train
2	Pressure Regulator Valve Train
3	Fluid Pump Blow Off Ball Valve Train
4	TCC Control Valve Train
5	Fluid Pump Drive Gear Tip The chamfer on the drive gear teeth face towards the pump body.
6	Fluid Pump Driven Gear Tip The chamfer on the driven gear OD faces the pump body.
7	Fluid Pump Cover
8	Fluid Pump Cover Bolt M6 x 25 (Qty: 23) Caution: Refer to Fastener Caution in the Preface section. Tighten 12 N·m (106 lb in)

Callout

Component Name

Torque Converter Fluid Seal Assembly

Tip
The fluid seal assembly must be staked in place using DT-49131 tool to ensure proper seal retention.

•	DT-47792 Seal Installer

•	DT-49131 Seal Staking Tool

Torque Converter Fluid Seal

DT-47791 Seal Installer

Torque Converter Fluid Seal Retainer

Fluid Filter Assembly

Tip
Rotate filter 90 degrees to engage locking tangs.