For 1990-2009 cars only
Removal Procedure
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the front wheel. Refer to Tire and Wheel Removal and Installation.
- Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement.
- Remove the engine protection shield. Refer to Engine Protection Shield Replacement.
- Remove the screws and the front fender liner.
Installation Procedure
- Install the screws and the front fender liner and tighten to 4 N·m (35 lb in).
- Install the engine protection shield. Refer to Engine Protection Shield Replacement.
- Install the front mud guard. Refer to Rear Mud Flap Guard Replacement.
- Install the front wheel. Refer to Tire and Wheel Removal and Installation.
- Lower the vehicle.
Caution: Refer to Title not found in the Preface section.
