GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Ignition Lock Cylinder Bulb Replacement

Removal Procedure

    Object Number: 1885470 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the steering column cover. Refer to Steering Column Trim Covers Replacement.
  3. Disconnect the electrical connector.
  4. Remove the key hole lamp retaining screw.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1885470 Size: SH
  1. Install the key hole lamp retaining screw and tighten to 2.5 N·m (22 lb in).
  2. Connect the electrical connector.
  3. Install the steering column cover. Refer to Steering Column Trim Covers Replacement.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.