Engine Coolant Temperature Sensor Replacement for Chevrolet Captiva Sport 2008

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling

Disconnect the engine wiring harness electrical connector (10) from the engine coolant temperature (ECT) sensor (3).




2. Remove the ECT sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the ECT sensor.

Tighten
Tighten the sensor to 22 N·m (16 lb ft).




2. Connect the engine wiring harness electrical connector (10) to the ECT sensor (3).
3. Fill the cooling system. Refer to Cooling System Draining and Filling