GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Oil Level Indicator Tube Replacement

Oil Level Indicator Tube Replacement LAT

Removal Procedure

    Object Number: 1571745 Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Remove the oil level indicator.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    4. Object Number: 1810743 Size: SH
  4. Remove the engine wiring harness clip  (3) from the oil level indicator tube bracket.

    5. Object Number: 1809558 Size: SH
  5. Remove the knock sensor electrical connector lead (4) from the oil level indicator tube bracket.
  6. Lower the vehicle.

    7. Object Number: 1647397 Size: SH
  7. Remove the oil level indicator tube bolt.
  8. Remove the oil level indicator tube.
  9. Remove the oil level indicator tube O-ring seals, if necessary.

Installation Procedure

    Object Number: 1647397 Size: SH
  1. Install NEW oil level indicator tube O-ring seals, if necessary.
  2. Install the oil level indicator tube.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the oil level indicator tube bolt.

    4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  4. Raise and support the vehicle.

    5. Object Number: 1809558 Size: SH
  5. Install the knock sensor electrical connector lead (4) to the oil level indicator tube bracket.

    6. Object Number: 1810743 Size: SH
  6. Install the engine wiring harness clip (3) to the oil level indicator tube bracket.
  7. Lower the vehicle.

    8. Object Number: 1571745 Size: SH
  8. Install the oil level indicator.
  9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

Oil Level Indicator Tube Replacement LE5

Removal Procedure

    Object Number: 1571745 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the oil level indicator.

    3. Object Number: 1647405 Size: SH
  3. Remove the engine harness clip (2) from the oil level indicator tube bracket.

    4. Object Number: 1647397 Size: SH
  4. Remove the oil level indicator tube bolt.
  5. Remove the oil level indicator tube.
  6. Remove the oil level indicator tube O-ring seals, if necessary.

Installation Procedure

    Object Number: 1647397 Size: SH
  1. Install NEW oil level indicator tube O-ring seals, if necessary.
  2. Install the oil level indicator tube.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the oil level indicator tube bolt.

    4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1647405 Size: SH
  4. Install the engine harness clip (1) to the oil level indicator tube bracket.

    5. Object Number: 1571745 Size: SH
  5. Install the oil level indicator.
  6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .