GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Blower Motor Replacement

Removal Procedure

    Object Number: 1284965 Size: SH
  1. Disconnect the electrical connector from the blower motor.
  2. Remove the blower motor screws from the HVAC module.
  3. Remove the blower motor from the HVAC module.

Installation Procedure

    Object Number: 1284965 Size: SH
  1. Install the blower motor to the HVAC module.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the blower motor screws to the HVAC module.

    3. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).

  3. Connect the electrical connector to the blower motor.