1

Rear Window Wiper Arm Finish Cover

Tip
Carefully release the four finish cover locking tabs securing the cover to the wiper arm.

2

Rear Wiper Arm Pivot Shaft Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
11 N·m (97 lb in)

3

Rear Window Wiper Arm Assembly

Procedure

1. Remove the rear window wiper blade assembly from the rear wiper arm. Refer to Rear Window Wiper Blade Replacement .
2. Cycle the rear wiper motor completely back to the park position prior to installing the rear wiper arm.
3. Align the rear wiper arm blade tip to the 2 mm black dot in the lower passenger side of the rear window.
4. Wet cycle the rear wiper arm and re-check the blade tip alignment to the 2 mm black dot. If above or below the dot, repeat above steps.