Transmission Control Lever Knob Replacement. Chevrolet Captiva Sport 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T70/6T75 🢒 Transmission Control Lever Knob Replacement

Callout

Component Name

Automatic Transmission Control Lever Knob Bezel

Tip

•	Removal: carefully insert a small flat-bladed tool between the bezel (1) and the shift knob. Apply careful downward pressure to the bezel to separate the bezel from the shift knob. The bezel will drop down approximately 13.0 mm (0.5 in) exposing the shift knob screws (2).

•	Installation: Lift the bezel (1) up to the shift knob until a click sound is heard indicating the bezel is secured to the shift knob.

Automatic Transmission Control Lever Knob Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
Loosen the shift control knob screw approximately 4-5 turns. It is not necessary to fully remove the screws from the shift control knob.

Tighten
Tighten the screw to 1.5 N·m (13 lb in).

Automatic Transmission Control Lever Knob