Preliminary Procedure

1. Remove the interior liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
2. Disconnect the electrical connector for the license plate lamps.
3. Disengage the electrical harness grommet from the outer liftgate panel.

1

Rear Liftgate Upper Applique Nut (Qty: 6)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
4 N·m (35 lb in)

2

Electrical Harness Grommet

3

Retainer (Qty: 3)

Tip
Carefully release the upper retainers, replace as needed.

4

Rear Liftgate Applique Panel

Procedure

Transfer parts as needed to the new applique panel.