1

Rear Side Door Frame Applique Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Remove the rear inside door upper trim applique, pull rearward to release.

Tighten
1.5 N·m (13 lb in)

2

Rear Side Door Frame Applique

3

Rear Side Door Front Frame Applique Screws (Qty: 4)

Tighten
1.5 N·m (13 lb in)

Procedure

1. Loosen the front edge of the primary weatherstrip to expose the screws.
2. Place the rear door window in the full down position.

Tip
Apply masking tape to the door frame and applique.

4

Rear Side Door Front Frame Applique

Tip
Pull the applique up and away from the outer seal weatherstrip.