Preliminary Procedures

1. Open either the driver or passenger door to assist in removal of the lower door molding.
2. Remove the 2 front side door lower molding nuts securing the molding to the inner door.

1

Lower Door Molding Locator Bolt/Pin (Qty: 2)

Procedure

1. Align the outer pins to the door.
2. Align the retainers and apply pressure to the exterior lower door molding to seat.
3. Install the front side door lower molding nuts and finger tighten.

2

Lower Door Molding Retainer (Qty: 15)

Procedure

Release the lower retainers working upward on the molding.

3

Lower Door Molding Assembly

Tip
Ensure the door is in the closed position prior to installing the lower molding to the door.