Instrument Panel Molding Replacement. Chevrolet Captiva Sport 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Instrument Panel Molding Replacement

Callout	Component Name
1	Instrument Panel Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Procedure Open the instrument panel compartment door to access the screws. Tighten 3 N·m (27 lb in)
2	Instrument Panel Molding Assembly Procedure Use a flat-bladed plastic trim tool in order to release the molding from the instrument panel.
3	Retainer Clip (Qty: 3)

Callout

Component Name

Instrument Panel Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Open the instrument panel compartment door to access the screws.

Tighten
3 N·m (27 lb in)

Instrument Panel Molding Assembly

Use a flat-bladed plastic trim tool in order to release the molding from the instrument panel.

Retainer Clip (Qty: 3)