GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Safety and Security 🢒 Remote Functions 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1763658 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement .
  3. Remove the remote control door lock receiver.
  4. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1763658 Size: SH
  1. Connect the electrical connector.
  2. Install the remote control door lock receiver.
  3. Install the driver knee bolster. Refer to Driver Knee Bolster Replacement .
  4. Connect the negative battery cable.
  5. For set up and programming, refer to Control module references. Control Module References