Symptoms - Automatic Transmission. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Symptoms - Automatic Transmission

Important: Use the symptom tables only if the following conditions are met:

•	Refer to Diagnostic Starting Point - Vehicle .

•	There are no DTCs set.

•	The control modules can communicate via the serial data link.

•	Review the system operation in order to familiarize yourself with the system functions. Refer to Transmission General Description and Transmission Component and System Description .

Visual/Physical Inspection

Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

•	Fluid Diagnosis

-	Transmission Fluid Check

-	Fluid Pressure High or Low

-	Automatic Transmission Fluid Leaks

-	Fluid Leak Diagnosis

•	Noise and Vibration Diagnosis

-	Whine/Growl Noise

-	Noise and Vibration Analysis

-	Torque Converter Diagnosis

•	Range Performance Diagnosis

No Park

-	No Drive in All Ranges

-	No Reverse Gear

•	Shift Quality Feel Diagnosis

-	Harsh Garage Shift

-	Harsh or Late First, Second, Third, and Fourth Shift

-	Harsh First and Reverse Shift

-	Harsh or Late Second and Sixth Shift

-	Harsh or Late Third, Fifth, and Reverse Shift

-	Harsh Fourth, Fifth, and Sixth Shift

•	Shift Pattern

-	No First and Reverse Gears

-	No First, Second, Third, and Fourth Gear

-	No Second and Sixth Gear

-	No Fourth, Fifth, and Sixth Gear

-	No Third, Fifth, and Reverse Gear

•	Torque Converter Diagnosis

-	Torque Converter Diagnosis

-	No Torque Converter Clutch Apply

-	No Torque Converter Clutch Release

•	Symptom Not Found or No Symptom Detected

-	Transmission Fluid Check

Road Test

-	Line Pressure Check

Note: Use the symptom tables only if the following conditions are met:

•	Refer to Diagnostic Starting Point - Vehicle.

•	There are no DTCs set.

•	The control modules can communicate via the serial data link.

•	Review the system operation in order to familiarize yourself with the system functions. Refer to Transmission General Description and Transmission Component and System Description.