Coolant Recovery Reservoir Replacement HP5

1. Drain the cooling system. Refer to Cooling System Draining and Filling
2. Remove the underhood junction block. Refer to Underhood Electrical Center or Junction Block Replacement
3. Remove the radiator vent inlet hose. Refer to Radiator Vent Inlet Hose Replacement



4. Remove the coolant recovery reservoir bolt (1).



5. Remove the coolant recovery reservoir bolt (1).
6. Remove the coolant recovery reservoir nut (2).
7. Unclip the coolant recovery reservoir hose from the fan shroud.
8. Remove the coolant recovery reservoir (3) from the vehicle.

1. Install the coolant recovery reservoir (3) to the vehicle.
2. Clip the coolant recovery reservoir hose to the fan shroud.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the coolant recovery reservoir nut (2) and tighten to 7.5 N·m (66 lb in).
4. Install the coolant recovery reservoir bolt (1) and tighten to 7.5 N·m (66 lb in).



5. Install the coolant recovery reservoir bolt (1) and tighten to 7.5 N·m (66 lb in).
6. Install the radiator vent inlet hose. Refer to Radiator Vent Inlet Hose Replacement
7. Install the underhood junction block. Refer to Underhood Electrical Center or Junction Block Replacement
8. Fill the cooling system. Refer to Cooling System Draining and Filling