Stabilizer Shaft Link Replacement. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Electrical 🢒 Stabilizer Shaft Link Replacement

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.
1	Stabilizer Shaft Link Ball Stud Nut (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tip Use the proper size allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut. Tighten 85 N·m (63 lb ft).
2	Stabilizer Shaft Link

Callout

Component Name

Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.

Stabilizer Shaft Link Ball Stud Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Use the proper size allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut.

Tighten
85 N·m (63 lb ft).

Stabilizer Shaft Link

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation.
1	Stabilizer Shaft Link Ball Stud Nut (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tip Use the proper size allen wrench to keep the stabilizer link ball stud from rotate while removing or installing the nut. Tighten 85 N·m (63 lb ft).
2	Stabilizer Shaft Link