GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Powertrain Mount Balance - Lower Mount

Important: Follow the balance procedure steps listed below. Powertrain mounts must be tightened in sequence.


    Object Number: 1810098 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Loosen the front transaxle mount through bolt.

    3. Object Number: 1810114 Size: SH
  3. Loosen the rear transaxle mount through bolt.
  4. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1810114 Size: SH
  5. Tighten the rear transaxle mount through bolt.

    6. Tighten
    Tighten the bolt to 100 N·m (74 lb ft).


    Object Number: 1810098 Size: SH
  6. Tighten the front transaxle mount through bolt.

    7. Tighten
    Tighten the bolt to 100 N·m (74 lb ft).

  7. Lower the vehicle.

Note: Follow the balance procedure steps listed below. Powertrain mounts must be tightened in sequence.


    Object Number: 1810098 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Loosen the front transaxle mount through bolt.

    3. Object Number: 1810114 Size: SH
  3. Loosen the rear transaxle mount through bolt.
  4. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.

    5. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1810114 Size: SH
  5. Tighten the rear transaxle mount through bolt to 100 N·m (74 lb ft).

    6. Object Number: 1810098 Size: SH
  6. Tighten the front transaxle mount through bolt to 100 N·m (74 lb ft).
  7. Lower the vehicle.