GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Water Pump Installation

Prior to installing the water pump, read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.


    Object Number: 412423 Size: SH
  1. Install the water pump assembly.
  2. Install the water pump bolts. Finger tighten the bolts.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the water pump bolts.

    4. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  4. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the water pump drain plug.
  5. Install the water pump drain plug, if necessary.

    6. Tighten
    Tighten the water pump drain plug to 20 N·m (15 lb ft).


    Object Number: 1867018 Size: SH
  6. Install the water feed tube.
  7. Lubricate the feed tube O-ring with antifreeze.
  8. Install the water feed tube by twisting and pushing toward the water pump. Take care not to tear or damage the O-ring.
  9. Install the thermostat housing to block bolts and stud.

    10. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1867013 Size: SH
  10. Install the engine coolant temperature sensor by hand.
  11. Tighten the engine coolant temperature sensor.

    12. Tighten
    Tighten the engine coolant temperature sensor to 20 N·m (15 lb ft).

Prior to installing the water pump, read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.


    Object Number: 412423 Size: SH
  1. Install the water pump assembly.
  2. Install the water pump bolts. Finger tighten the bolts.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the water pump bolts to 25 N·m  (18 lb ft).
  4. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the water pump drain plug.
  5. Install the water pump drain plug, if necessary. Tighten to 20 N·m  (15 lb ft).

    6. Object Number: 1867018 Size: SH
  6. Install the water feed tube.
  7. Lubricate the feed tube O-ring with antifreeze.
  8. Install the water feed tube by twisting and pushing toward the water pump. Take care not to tear or damage the O-ring.
  9. Install the thermostat housing to block bolts and stud and tighten to 10 N·m  (89 lb in).

    10. Object Number: 1867013 Size: SH
  10. Install the engine coolant temperature sensor by hand.
  11. Tighten the engine coolant temperature sensor and tighten to 20 N·m  (15 lb ft).