GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1608498 Size: SH
  2. Disconnect the engine oil pressure sensor/switch electrical connector (1).

    3. Object Number: 1609660 Size: SH
  3. Remove the engine oil pressure sensor/switch.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1609660 Size: SH
  1. Install the engine oil pressure sensor/switch.

    2. Tighten
    Tighten the sensor to 16 N·m (12 lb ft).


    Object Number: 1608498 Size: SH
  2. Connect the engine oil pressure sensor/switch electrical connector (1).

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1608498 Size: SH
  2. Disconnect the engine oil pressure sensor/switch electrical connector (1).

    3. Object Number: 1609660 Size: SH
  3. Remove the engine oil pressure sensor/switch.

Installation Procedure

    Caution: Refer to Component Fastener Tightening Caution in the Preface section.


    Object Number: 1609660 Size: SH
  1. Install the engine oil pressure sensor/switch and tighten to 16 N·m (12 lb ft).

    2. Object Number: 1608498 Size: SH
  2. Connect the engine oil pressure sensor/switch electrical connector (1).