For 1990-2009 cars only
- Remove the camshaft rear bearing hole plug.
- Remove the rear oil gallery plugs (102, 103).
- Remove the front oil gallery plugs (107, 110, 137).
- Remove the engine front cover locating pins (546).
- Remove the engine block plug.
- Remove the transmission locating pins (A) .
- Remove the knock sensors.
- Remove the engine oil pressure indicator switch.
Notice: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not replaced, a thread locking chemical must be applied to the fastener threads. Failure to replace the fasteners or apply a thread-locking chemical MAY reduce gasket sealing capability.
- Remove the camshaft rear bearing hole plug.
- Remove the rear oil gallery plugs (102, 103).
- Remove the front oil gallery plugs (107, 110, 137).
- Remove the engine front cover locating pins (546).
- Remove the engine block plug.
- Remove the transmission locating pins (A).
- Remove the knock sensors.
- Remove the engine oil pressure indicator switch.
Caution: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not replaced, a thread locking chemical must be applied to the fastener threads. Failure to replace the fasteners or apply a thread-locking chemical MAY reduce gasket sealing capability.
