For 1990-2009 cars only
- Coat the valve lifters using prelube GM P/N 12345501 (Canadian P/N 992704) or the equivalent.
- Install the valve lifters in their original locations.
- Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or the equivalent to the threads.
- Install the valve lifter guides and guide bolts.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the valve lifter guide bolts to 10 N·m (89 lb in).
- Coat the valve lifters using prelube GM P/N 12345501 (Canadian P/N 992704) or the equivalent.
- Install the valve lifters in their original locations.
- Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or the equivalent to the threads.
- Install the valve lifter guides and guide bolts, and tighten to 10 N·m (89 lb in).
Caution: Refer to Fastener Caution in the Preface section.
