- Install the NEW oil filter bypass valve. Seat the valve fully below the bypass valve hole chamfer.
- Install the oil filter adapter (1) and gasket.
- Apply threadlocker P/N 21485277 to the bolt threads if required.
- Install the oil filter adapter bolts.
- Install the oil filter adapter heat shield (2).
- Install the oil filter adapter heat shield nuts.
- Install the oil filter.
Notice: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not replaced, a thread locking chemical must be applied to the fastener threads. Failure to replace the fasteners or apply a thread-locking chemical MAY reduce gasket sealing capability.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the oil filter adapter bolts to 25 N·m (18 lb ft).
Tighten
Tighten the oil filter adapter heat shield nuts to 25 N·m (18 lb ft).
Tighten
Tighten the oil filter to 30 N·m (22 lb ft).
- Install the NEW oil filter bypass valve. Seat the valve fully below the bypass valve hole chamfer.
- Install the oil filter adapter (1) and gasket.
- Apply threadlocker P/N 21485277 to the bolt threads if required.
- Install the oil filter adapter bolts and tighten to 25 N·m (18 lb ft).
- Install the oil filter adapter heat shield (2).
- Install the oil filter adapter heat shield nuts and tighten to 25 N·m (18 lb ft).
- Install the oil filter and tighten to 30 N·m (22 lb ft).
Caution: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not replaced, a thread locking chemical must be applied to the fastener threads. Failure to replace the fasteners or apply a thread-locking chemical MAY reduce gasket sealing capability.
Caution: Refer to Fastener Caution in the Preface section.
