GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Air Conditioning (A/C) Refrigerant Low Temperature Sensor Replacement

Removal Procedure

    Object Number: 1646775 Size: SH
  1. Remove the driver knee bloster panel. Refer to Driver Knee Bolster Replacement .
  2. If equipped with OnStar®, remove the communications interface module. Refer to Communication Interface Module Replacement .
  3. Disconnect the temperature sensor connector from the temperature sensor.
  4. Twist the temperature sensor one quarter turn to disengage from the evaporator case assembly.
  5. Remove the temperature sensor from the evaporator case assembly.

Installation Procedure

    Object Number: 1646775 Size: SH
  1. Install the temperature sensor to the evaporator case assembly.
  2. Twist the temperature sensor one quarter turn to engage to the evaporator case assembly.
  3. Install the temperature sensor connector to the temperature sensor.
  4. If removed, install the communications interface module. Refer to Communication Interface Module Replacement .
  5. Install the driver knee bolster panel. Refer to Driver Knee Bolster Replacement .