GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Replacement

Removal Procedure

    Object Number: 941821 Size: SH
  1. Place the front door window in the full down position.
  2. Remove the inner front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the front door water deflector.
  4. Lower the window (2) to the center of the inner door panel, align the bolts with the access.
  5. Remove the window guide bolts (1) from the window regulator.
  6. Slide the window (2) down and out of the primary glass channels.
  7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure

    Object Number: 941821 Size: SH
  1. Install the window (2) by sliding the window into the door through the outside door belt opening.
  2. Install the window into the primary glass channels and rest the window on the regulator guide plate.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the window guide bolts (1) to the regulator.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Install the front door water deflector.
  5. Install the front inner door trim panel. Refer to Front Side Door Trim Panel Replacement .
  6. Inspect the window for proper operation.

Removal Procedure

    Object Number: 941821 Size: SH
  1. Place the front door window in the full down position.
  2. Remove the inner front door trim panel. Refer to Front Side Door Trim Panel Replacement.
  3. Remove the front door water deflector.
  4. Lower the window (2) to the center of the inner door panel, align the bolts with the access.
  5. Remove the window guide bolts (1) from the window regulator.
  6. Slide the window (2) down and out of the primary glass channels.
  7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure

    Object Number: 941821 Size: SH
  1. Install the window (2) by sliding the window into the door through the outside door belt opening.
  2. Install the window into the primary glass channels and rest the window on the regulator guide plate.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the window guide bolts (1) to the regulator. Tighten the bolts to 10 N·m (89 lb in).
  4. Install the front door water deflector.
  5. Install the front inner door trim panel. Refer to Front Side Door Trim Panel Replacement.
  6. Inspect the window for proper operation.