Preliminary Procedures

1. Remove the left rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement.
2. Remove the left rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement.
3. Lower the rear of the headliner as needed. Refer to Headlining Trim Panel Replacement.

1

Digital Radio Antenna Cable Assembly

Procedure

1. Disconnect the electrical connectors at each end of the cable.
2. If the cable is taped into the wiring harness then cut the ends off the old cable and route the new cable close to the old one as possible using tie straps to secure the new cable.