GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Transmission Control Lever Knob Replacement

Object Number: 1869729 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Apply the parking brake.
  2. Remove the front floor console extension panel. Refer to Front Floor Console Extension Panel Replacement.
  3. Disconnect the transmission tap up/tap down switch electrical connector.

1

Automatic Transmission Control Lever Knob Bezel

Tip

    • Removal: carefully insert a small flat-bladed tool on the right and left sides of the bezel (1) between the bezel and the shift knob. Apply careful downward pressure to the bezel to separate the bezel from the shift knob. The bezel will drop down approximately 13.0 mm (0.5 in) exposing the shift knob screws (2).
    • Installation: Lift the bezel (1) up to the shift knob until a click sound is heard indicating the bezel is secured to the shift knob.

2

Automatic Transmission Control Lever Knob Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Loosen the shift control knob screws approximately 4-5 turns. It is not necessary to fully remove the screws from the shift control knob.

Tighten
Tighten the screw to 1.5 N·m (13 lb in).

3

Automatic Transmission Control Lever Knob


Object Number: 1869729 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Apply the parking brake.
  2. Remove the front floor console extension panel. Refer to Front Floor Console Extension Panel Replacement.
  3. Disconnect the transmission tap up/tap down switch electrical connector.

1

Automatic Transmission Control Lever Knob Bezel

Tip

    • Removal: carefully insert a small flat-bladed tool on the right and left sides of the bezel (1) between the bezel and the shift knob. Apply careful downward pressure to the bezel to separate the bezel from the shift knob. The bezel will drop down approximately 13.0 mm (0.5 in) exposing the shift knob screws (2).
    • Installation: Lift the bezel (1) up to the shift knob until a click sound is heard indicating the bezel is secured to the shift knob.

2

Automatic Transmission Control Lever Knob Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Loosen the shift control knob screws approximately 4-5 turns. It is not necessary to fully remove the screws from the shift control knob.

Tighten
Tighten the screw to 1.5 N·m (13 lb in).

3

Automatic Transmission Control Lever Knob