GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Automatic Transmission Range Selector Lever Replacement

Removal Procedure

    Object Number: 1869726 Size: SH
  1. Disconnect the range select cable (2) from the range select lever (1).
  2. Release the range select cable retaining clip (3) and remove the cable from the range select cable bracket (4).

    3. Object Number: 1547451 Size: SH
  3. Remove the transmission range select lever nut (2).
  4. Remove the transmission range select lever (3) from the transmission manual shaft (1).

Installation Procedure

    Object Number: 1547451 Size: SH
  1. Install the transmission range select lever (3) to the transmission manual shaft (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the transmission range select lever nut (2).

    3. Tighten
    Tighten the nut to 35 N·m (26 lb ft).


    Object Number: 1869726 Size: SH
  3. Install the range select cable to the range select cable bracket (4). Ensure the cable retaining clip (3) is fully seated.
  4. Install the shift control cable (2) to the range select lever (1).

Removal Procedure

    Object Number: 1869726 Size: SH
  1. Disconnect the range select cable (2) from the range select lever (1).
  2. Release the range select cable retaining clip (3) and remove the cable from the range select cable bracket (4).

    3. Object Number: 1547451 Size: SH
  3. Remove the transmission range select lever nut (2).
  4. Remove the transmission range select lever (3) from the transmission manual shaft (1).

Installation Procedure

    Object Number: 1547451 Size: SH
  1. Install the transmission range select lever (3) to the transmission manual shaft (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the transmission range select lever nut (2) and tighten to 35 N·m (26 lb ft).

    3. Object Number: 1869726 Size: SH
  3. Install the range select cable to the range select cable bracket (4). Ensure the cable retaining clip (3) is fully seated.
  4. Install the shift control cable (2) to the range select lever (1).